Voip - Promax 27 Manuel

USER'S MANUAL. PROMAX-27
Pressing the selection key
frequency. Pressing the cursor key
At the bottom of the screen it will appear next options:
BACK [F1]:
VoIP [F2]:
IPTV [F3]:
PING [F4]:
TRACE [F5]:
Next we are going to explain each one of functions you can use in register mode:
VoIP, IPTV, PING and TRACEROUTE.
4.2.4.1

VoIP

Service Description
To implement the basic telephony service in CATV networks is necessary to
consider the profile of a demanding customer used to the quality of traditional telephone
networks. To meet those expectations must be maintained almost the quality of the
traditional service.
09/2010
DOCSIS/EuroDOCSIS REGISTRATION 01:43:09
FR: 128.50 MHz CH:
IP CABLE MODEM: 192.9.100.252
IP GATEWAY: 192.9.100.1
NETMASK: 255.255.255.0
IP TOD SERVER: 192.9.100.248
IP TFTP SERVER: 192.9.100.204
CONFIGURATION FILE: ---
TUNING
BACK VoIP IPTV
Figure 18.- Registered mode Screen.
[8] you can change between channel and tuned
[7] you can change the values.
Back to the previous screen MODEM.
It checks the VoIP service (refer to section 4.2.4.1).
It checks the TV over IP service (refer to section
4.2.4.2).
It checks the packet transmission over the cable (refer
to section 4.2.4.3).
It shows the route taken by packets across an IP
network, from the instrument to the host (refer to
section 4.2.4.4).
S04 / CCIR
PING TRACE
Page 35