Promax 27 Manuel page 128

Measurements shown on the screen (Figure 26.-) are:
FR:
CH:
LVL:
AF:
V/A:
∆F:
At the bottom of the screen is shown the following options:
SLM [F1]:
VIDEO [F2]:
SPECTRUM / SCAN [F3]:
LOGGER [F4]:
Page 50
Figure 26.- Analogue Audio Signal Measurement
Signal tuned frequency.
Channel and plan channel.
Audio carrier level. (It appears on numerical and graphical
mode).
Audiocarrier frequency.
Video / Audio Ratio.
Audio carrier Offset.
It leads to Signal Level Meter screen.
It returns to previous screen (ANALOG TV VIDEO
METER).
It goes to SPECTRUM mode (refer to 4.2.5.4.2) / SCAN
mode (refer to section 4.2.5.4.1).
Through this function you can store measurements in
the memory of the instrument (it appears on numerical
and graphical mode) for later viewing, printing or
transfer to a PC (refer to 4.2.5.4.3).
USER'S MANUAL. PROMAX-27
09/2010