Specifications; Selective Optical Power Meter; Optical To Rf Converter - Promax OP-009-PS Manuel D'utilisation

The optical to RF converter option directly receives optical signals and
modulates them in RF. With this option, user can measure terrestrial or cable
(up to 1 GHz) networks or optical LNB for satellite antennas, so that the installer does
not need any additional equipment to measure this type of installations.
With this module the user can keep working on applications of terrestrial and
cable television enjoying all the benefits of the TV EXPLORER HD: DVB-T and
DVB-C, measurements, constellation, MER, BER, etc..The analyser becomes a true
"all in one" tool for the telecommunications installer.
This expansion module is available for TV EXPLORER HD,
units (both for new equipments or to upgrade equipments owned).
NOTE: The installation of fibre optic options replaces the connections ASI IN
and ASI OUT.

1.2 Specifications

1.2.1 Selective optical power meter

Measure bands
Connector
Dinamic Range
Input
Accuracy

1.2.2 Optical to RF converter

RF band converted:
Optical Cable and DTT links
Optical IF-Satellite Installations
Optical input
RF output
Optical Power Measurement
Page 2
User's Manual OP-009-PS
HD
1310 nm ± 50 nm.
1490 nm ± 10 nm.
1550 nm ± 15 nm.
FC/APC.
- 49.9 dBm to +10 dBm.
± 0.5 dB.
From 65 MHz to 1000 MHz.
From 950 MHz to 5450 MHz.
(For universal optical LNB).
From 1200 nm to 1600 nm.
From 65 MHz to 2150 MHz.
Yes.
and HD+
LE
09-2012