Remote Control (Accessory); Remote Control Assembly - WAGNER Plast Coat 830 Mode D'emploi

Masquer les pouces Voir aussi pour Plast Coat 830:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GB
commIssIonIng
AutOMAtIC SPRAy LANCe
3
2
6
5
4
6.6
ReMOte CONtROL (ACCeSSORy/ NOt INCLuDeD
IN tHe SCOPe OF DeLIVeRy)
The remote control can be used to set the operating mode
(Fig. 13, 1) and delivery volume (Fig. 13, 2) without the opera-
tor having to physically go to the machine.
The remote control can be secured to the spray lance with a
cable tie.
6.6.1

ReMOte CONtROL ASSeMBLy

• Ensure that the selector switch (Fig. 15, 2) is in the "A" posi-
tion and that the mains plug is disconnected.
• Connect connection cable (Fig. 14, 1) to connection (Fig.
14,2).
• Connect mains plug to mains power supply.
• Set the switch (Fig. 14, 3) to "II", to activate the remote con-
trol.
If the connection cable is disconnected from
the pump, the pump automatically switches
off.
46
PNeuMAtIC SPRAy LANCe
1
5
4
6.6
ReMOte CONtROL (ACCeSSORy/ NOt INCLuDeD
IN tHe SCOPe OF DeLIVeRy)
The remote control can be used to set the operating mode
(Fig. 13, 1) and delivery volume (Fig. 13, 2) without the opera-
tor having to physically go to the machine.
The remote control can be secured to the spray lance with a
cable tie.
6.6.1
ReMOte CONtROL ASSeMBLy
• Ensure that the selector switch (Fig. 15, 2) is in the "A" posi-
tion and that the mains plug is disconnected.
• Connect connection cable (Fig. 14, 1) to connection (Fig.
14,2).
• Connect mains plug to mains power supply.
• Set the switch (Fig. 14, 3) to "II", to activate the remote con-
trol.
1
2
Plast Coat 830
6
8
If the connection cable is disconnected from
the pump, the pump automatically switches
off.
1
7
3
2
1
2
3

Publicité

Table des Matières
loading

Table des Matières