WAGNER Plast Coat 830 Mode D'emploi page 35

Plast Coat 830
table of Contents
1 SAFety ReGuLAtIONS ______________________ 36
2 INtRODuCtION tO WORkING WItH tHe
MORtAR SPRAyING MACHINe PLAStCOAt 830 _ 38
2.1 Function of the mortar spraying machine
PlastCoat 830 ________________________________ 38
2.2 Processible coating materials ___________________ 38
3 teCHNICAL DAtA ___________________________ 38
4 exPLANAtORy DIAGRAM FOR PLAStCOAt 830 _ 39
4.1 Operating elements and displays on device _______ 40
4.2 Drive _______________________________________ 41
4.3 Compressor (accessory) _______________________ 41
4.4 Mortar hose for pneumatic spray lance ___________ 41
4.5 Pneumatic spray lance ________________________ 41
4.6 Mortar hose for automatic spray lance ___________ 42
4.7 Automatic spray lance _________________________ 42
5 tRANSPORtAtION __________________________ 43
5.1 Moving _____________________________________ 43
5.2 Transport using a crane ________________________ 43
5.3 Transportation in vehicle ______________________ 43
6 COMMISSIONING ___________________________ 43
6.1 Installation location ___________________________ 43
6.1.1 Connection to mains power supply/ Extension cable 43
6.2 Initial starting-up _____________________________ 43
6.2.1 Scope of supply ______________________________ 43
6.2.2 Assembly ___________________________________ 44
6.2.3 Assembling the bag support (accessory) __________ 44
6.3 Connecting the mortar hose ___________________ 45
6.4 Compressor (accessory) _______________________ 45
6.5 Connecting the spray lance ____________________ 45
6.6 Remote control (accessory) ____________________ 46
6.6.1 Remote control assembly ______________________ 46
6.7 Preparing the mortar spraying machine __________ 47
6.7.1 Filling the container with a bag support __________ 48
6.8 Beginning of the spraying process _______________ 49
6.9 End of the spraying process ____________________ 49
7 GeNeRAL INFORMAtION ABOut tHe
APPLICAtION teCHNIQue ___________________ 50
7.1 Spraying technique ___________________________ 50
8 SHuttING DOWN AND CLeANING ____________ 50
8.1 Cleaning the mortar hose ______________________ 50
8.2 Cleaning the device and replacing the stator ______ 50
8.3 Cleaning the spray lance _______________________ 52
9 MAINteNANCe _____________________________ 52
9.1 Mechanical maintenance ______________________ 52
9.2 Electrical maintenance ________________________ 52
9.3 Long periods of non-usage _____________________ 52
9.4 Rotor replacement ___________________________ 52
10 eLIMINAtING FAuLtS ________________________ 53
11 SPARe PARtS LISt FOR PLAStCOAt 830 _______ 56
12 SPARe PARtS LISt OF SPRAy LANCe
WItH AutOMAtIC CONtROL _________________ 58
13 SPARe PARtS LISt PNeuMAtIC SPRAy LANCe __ 59
14 PLAStCOAt 830 ACCeSSORIeS________________ 60
Testing of the mortar spraying machine _______________ 60
Note on disposal __________________________________ 60
Important information on product liability_____________ 60
Guarantee declaration _____________________________ 60
CE declaration of conformity _______________________ 124
European service network _________________________ 128
GB
table of contents
35