Angelo Po FX 82 G2T Manuel D'utilisation Et D'installation page 47

Table of preset regeneration programs
P01 – Food-in-dish regeneration program: for
thin pieces of meat and fish (both precooked and
raw)
P02 – Food-in-dish regeneration program: for thin
pieces of meat and large fish
Automatic preheating 150°C
P03 – Food-in-dish regeneration program: for
meat and fish in general (increase the time in stage
2 for pasta or stuffed items)
P04 - Cooking program (only for E2 version): for
lean roast pork
P05 - Cooking program (only for E2 version): for
whole roast chicken
P06 - Cooking program (only for E2 version): for
rare roast beef
- The key modifies the preset standard regeneration programs.
Press the key to show the program of choice on the display (7).
Press the key (16) to start the program selected.
Once the program has been started only, keys (4-5-6-10) and knob (21) can be
used to modify the values set for the current stage.
During cooking, buttons (1-2-3) can be used to modify the cooking mode.
Note: Changes made in this way only remain active for the current cooking
process; to save them permanently, press the button of the cooking mode (1-2-
3) being used for at least 3 seconds.
Important
To return to the original settings, with the appliance in the STOP phase (icon
(16) lit with a green light) press the button (12) and hold it down for longer than
3 seconds (the whole panel powers down) then press the button (18) and hold
it down for at least 3 seconds.
English
Automatic preheating 130°C
Stage 1 - Combined / 110°C / Humidity 10% / 2'
Stage 2 - Convection / 130°C / vent closed / 3'
Stage 3 – Convection/ 125°C / vent open / 1'
Automatic preheating 150°C
Stage 1 - Combined / 130°C / Humidity 10% / 3'
Stage 2 - Convection / 135°C / vent closed / 3'
Stage 3 – Convection/ 140°C / vent open /1'
Automatic preheating 150°C
Stage 1 - Combined / 130°C / Humidity 10% / 2'
Stage 2 - Convection / 140°C / vent closed / 5'
Stage 3 – Convection / 140°C / vent open / 3'
Automatic preheating 120°C
Stage 1 – Steam/ 100°C/ 8'
Stage 2 - Combined / 140°C / Humidity 60% / Final core tem-
perature 57°C
Stage 3 - Convection / 170°C / Final core temperature 68°C
/ vent open
Automatic preheating 205°C
Stage 1 – Convection/ 185°C / 8'
Stage 2 – Convection/ 215°C / 12'
Stage 3 - Convection / 240°C / Final core temperature 72°C
/ vent open
Automatic preheating 165°C
Stage 1 - Convection / 145°C / Final core temperature 20°C
Stage 2 - Convection / 110°C / Final core temperature 42°C
Stage 3 - Convection / 90°C / Final core temperature 54°C
- 11 - Use and installation manual
IT
GB
DE
FR
ES