Angelo Po FX 82 G2T Manuel D'utilisation Et D'installation page 46

13 – "ECO-PLUS" button: for turning the "ECO" (to
save energy but only for reduced loads) and "PLUS"
(which lets you use the appliance with higher power)
functions on or off.
- Press once (icon lit with a green light) to turn the
"ECO" function on.
- Press twice (icon lit with a red light) to activate
the "PLUS" function.
14 – Fan speed button: used to set the intermittent
speed of the fan.
15 – Optional probe icon: when lit, this indicates
that the optional probe is on.
This function disables use of the "Product core
probe temperature setting" button.
16 – "START-STOP" button: Starts or ends the se-
lected program cycle, shown on the display (cooking
cycle, washing cycle, etc.).
- Icon lit (green light): programme cycle finished.
- Icon lit (red light): programme cycle running.
17 – Steam injection button: for increasing the hu-
midity. Press the button to inject steam (for 5 sec-
onds) into the oven during any cooking phase.
18 – "Regeneration" programs button
- The key selects the preset standard regeneration
programs.
Press the key (once) and the display (7) will show
the message "P01".
Press the key (twice) and the display (7) will show
the message "P02".
Press the key (2 times) and the display (7) will
show the message "P03".
Press the button (4 times) and the display (7) will
show the message "P04".
IT
Press the button (5 times) and the display (7) will
GB
show the message "P05".
Press the button (6 times) and the display (7) will
DE
show the message "P06".
Press the button (7 times) and the display (7) will show the message "OUT" and
FR
quit the program.
Press the key (16) to start the program selected.
ES
English
1
7
4
5
6
12
13
16
17
18
21
- 10 -
2 3
8
9
10
11
15
14
20
19
22
IDM-39619500300.tif
Use and installation manual