Ets 3800 For External Sensor Probe - HYDAC ELECTRONIC ETS 3000 Série Notice D'utilisation

20

15.2 ETS 3800 FOR EXTERNAL SENSOR PROBE

Input data
4)
Measuring range
Sensor Connection
Output data
Output signals
Accuracy (display, analogue output)
Temperature drift (enviroment)
Analogue output
Switching outputs
Design
Switching current
Switching cycles
Parameterisation
Ambient conditions
Ambient temperature range
Storage temperature range
-mark
Vibration resistance to
DIN EN 60068-2-6 (0 .. 500 Hz)
Shock resistance to
DIN EN 60068-2-29 (11 ms):
Protection class to IEC 60529
Other data
Supply voltage
Current consumption
Residual ripple of supply voltage
Display
Weight
Note: Reverse polarity protection of the supply voltage, overvoltage, override and and short circuit
protection are provided. FS (Full Scale) = relative to the complete measuring range
1)
Higher pressure resistance available on request.
2)
-20°C / -13°F with FPM seal, -40 °C / - 40°F on request
3)
Depending on the temperature range of the connected temperature sensor, the measurement
range of the ETS 3800 may be reduced.
Edition: 2015-04-14
-30 .. 150 °C (-22 .. 302 °F)
Female cable connection M12x1, 4 pole
Output 1: PNP transistor output
Output 2: can be configured as PNP transistor
switching output or as analogue output
± 1.0 % FS ( + PT100 error)
≤±0.015 % FS / °C (zero point and range)
selectable:
0 .. 10 V; ohmic resistance: min. 1 kΩ
4 .. 20mA; ohmic resistance ≤ 500 Ω
is equivalent to -30 .. +150°C
PNP transistor output
Programmable as N/O or N/C
SP1: max. 0.1 A
SP2: max. 0.25 A
> 100 million
Via IO-Link interface, see chap. 7
or push buttons on the ETS 3800
-25 .. + 80 °C (-13 .. 176 °F)
-40 .. + 80 °C (-40 .. 176 °F)
EN 61000-6-1 / -2 / -3 / -4
≤ 10 g
≤ 50 g
IP 67
9 .. 35 V DC without analogue output
18 .. 35 V DC with analogue output
≤ 0.535 A with 2 active switch outputs
≤ 35 mA with inactive switching outputs
≤ 55 mA with inactive switching output
≤ 5 %
4-digit, LED, 7-segment, red
Height of digits 7 mm
approx. 87 g (excluding connector and
probe)
HYDAC ELECTRONIC GMBH
and analogue output
ETS 3000 IO-Link
Part No.: 669904