Insulation Monitoring; Arc Detector / Interrupter; Warning Notices Affixed To The Device - Fronius Galvo 208-240 Instructions De Service

Insulation monitoring

In photovoltaic systems with ungrounded solar modules, the inverter checks the resis-
tance between the photovoltaic system's positive or negative pole and the ground poten-
tial. In the case of a short circuit between the DC+ or DC- cable and the ground (e.g., due
to poorly insulated DC cables or faulty solar modules) the inverter disconnects from the
grid.
Arc Detector / In- The inverter has an integrated arc detector / interrupter, which detects and deletes serial
terrupter arcs.
A serial arc may occur after the following example errors or situations:
-
-
-
-
-
If an arc is detected, the power is shut down and the grid power feed operation is interrupt-
ed. A status code appears on the display.
The status code on the display must be reset manually before the grid power feed opera-
tion can be resumed.
The power shut down also deletes the serial arc.
Warning Notices The inverter contains and displays warning notices and safety symbols. These warning no-
Affixed to the De- tices and safety symbols must NOT be removed or painted over. The notices and symbols
vice warn against operating the equipment incorrectly, as this may result in serious injury and
damage.
12
poorly connected DC plug
defective solar module connection sockets
high resistance solder connections between the cells of a solar module
incorrect cable connected to the input terminal of an inverter
defective DC cables that allow a connection to the ground.
NOTE! Power optimizers for solar modules or data transfer via DC cables (PLC
– Power Line Communication) in the PV system can compromise the correct
function of the arc detector / interrupter.
When using such components, it is the responsibility of the system installer to en-
sure that the arc detector / interrupter functions correctly. Contact Fronius Tech-
nical Support for further information.
Safety Symbols:
Danger of serious injury or dam-
age due to incorrect operation
Do not use the functions de-
scribed until you have thoroughly
read and understood the following
documents:
- these operating instructions
- all operating instructions for
system components of the
photovoltaic system, espe-
cially the safety rules
Dangerous electrical voltages
You must wait until the capacitors
have discharged