Backlighting Of The Display - Hettich EBA 200 Mode D'emploi

EN
19.5

Backlighting of the display

To save energy, it can be set that, after a centrifugation run, the backlighting of the display switches off after 2
minutes.
With the rotor at a standstill, this can be set as follows:
The procedure can be aborted at any time by pressing the
 Press and hold the button for eight
SELECT
seconds.

 Press the key until the following is
SELECT
displayed.

 Press the key.
START
PULSE

 Press the key until one of the following is
SELECT
displayed:
Power save : Automatic shutdown of the
backlighting.
off : Automatic shutdown deactivated.
on : Automatic shutdown activated.

 With the keys, set off or on.
t

 Press the button to save the setting.
START
PULSE

 Press the key once to exit the "
STOP
OPEN
Settings"
menu or press twice to exit the "
MACHINE MENU ".
68/146
STOP
OPEN
key. In this case, the settings are not stored.
RPM
>RCF< t/min:s
RPM
>RCF< t/min:s
RPM
>RCF< t/min:s
RPM
>RCF< t/min:s
>RCF< RPM t/min:s
RPM
>RCF< t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
Rev. 05 / 05.2020
RPM
>RCF< t/min:s
RPM
>RCF< t/min:s
>RCF< RPM t/min:s
Example:
>RCF< RPM t/min:s
AB1800DEENFRIT