Continuous Run - Hettich EBA 200 Mode D'emploi

EN
 After the time elapses or if the centrifugation run is
STOP
OPEN
aborted by pressing the
occurs with the set brake stage.
The brake stage is displayed. Example
16.2

Continuous run

 Press the key to activate the RPM display
RCF
(RPM) or the RCF display ( RCF ) as
needed.

 Input the desired centrifugation parameters. Set the
parameters t/min and t/sec to zero (see the chapter
"Entering centrifugation parameters").

 Press the key to start the centrifugation
START
PULSE
run.
During the centrifugation run, the rotor
speed or the resulting RCF value and
elapsed time are displayed.

 Press the key to end the centrifugation
STOP
OPEN
run.
The run-out occurs with the set brake
stage. The brake stage is displayed.
Example f
60/146
Example:
RPM display (RPM)
>RCF<
key, the run-out
f
Example:
RPM display (RPM)
>RCF<
>RCF<
>RCF<
>RCF<
Rev. 05 / 05.2020
Example:
RCF display ( RCF )
RPM
t/min:s >RCF<
Example:
RCF display ( RCF )
RPM t/min:s >RCF<
RPM t/min:s >RCF<
RPM
t/min:s >RCF<
RPM t/min:s >RCF<
RPM
t/min:s
RPM t/min:s
RPM t/min:s
RPM
t/min:s
RPM t/min:s
AB1800DEENFRIT