Standard Mode; Bargraph Display In The Standard Mode - Burkert 8625 Instructions De Service

7.2

Standard Mode

è Switch the operating voltage on.
After switching on the operating voltage, all the segments of the control unit light
up for about 2 seconds (display test).
The current temperature will then be displayed.
Display of the actual value
Fig. 7: Display in the standard mode

7.2.1 Bargraph display in the standard mode

The bar graph indicates the current deviation of the actual value from the set-
value. If both values are the same, only one bar will be indicated in the middle.
For each 2 % of deviation, one additional bar will be displayed in the
corresponding direction.
Example:
Operating Manual No. 800 209
Display of the set-value
Actual and set-values identical
Deviation of the actual value from the set-
value = -2 %
Deviation of the actual value from the set-
value = +4 %
33