Güde 160 GC Traduction Du Mode D'emploi D'origine page 9

GB
!!! Please read this instruction for operation carefully before putting the machine into operation !!!
Do you have any technical questions? Claim? Do you need spare parts or instructions for operation?
We are ready to help you quickly and without unnecessary bureaucracy at our site www.guede.com in the part Service.
Please help us in helping you. In order to identify your machine in case of a claim we need its serial number, product number
GB
and year of production. All the data mentioned can be found at the type plate. Please write them down bellow to have them
always handy:
Serial number:
Phone.: +49 (0) 79 04 / 700-360
Given unfavourable conditions in the power supply the equipment may cause the voltage to drop temporarily. If the
supply impedance "Z" at the connection point to the public power supply exceeds 0,233 Ω EN 61000-3-11 it may be
necessary to take further measures before the equipment can be used as intended from this power supply. If necessary, you
can ask your local electricity supply company for the impedance value.
Warranty
A warranty period of 12 months applies to commercial use and 24 months apply to private use and commences on the day of
purchase of the device.
Warranty applies exclusively to failures due to defective material or workmanship. An original sale slip with indication of date of sale
must be presented in case of claiming for the warranty rights.
Warranty does not cover unprofessional use such as device overload, violent use, damage caused by third party or foreign materials,
failure to comply with operations and assembly manual, and normal wear and tear.
Device
figure 1/8
1. Welding current controller
2. Ground cable (-)
3. Electrode cable (+)
4. Main switch
Technical Data
Ordering No. 20055 INVERTOR 100 GC
Supply voltage
Mains power
Minimum Protection
Maximum welding current
Idling voltage
Recommended thickness of material
Electrodes
Range of control
Switching time at maximum current
Protection class
Approximate weight
Ordering No. 20046 INVERTOR 140 GC
Supply voltage
Mains capacity
Minimum protection
Idling voltage
Recommended thickness of material
Electrodes
Range of control
Start time at maximum current
Insulation class
Protection class
A.V. 2 Surplus print even in shortened version requires permission.
Technical changes reserved. Illustrations used represent examples.
Product number:
Fax:
230 V~50 Hz
3,2 kVA
16 A
100 A
85 V
0,8-8 mm
1,6-2,5 mm
10-100 A
100A~15% / 55A~60% / 45 A~100%
IP21S
3,6 kg
230V~50 Hz
4,7 kVA
16 A
80 V
0,8-12 mm / WIG 0,5-2mm
1,6-4 mm
20-140 A
140 A~30% / 100 A~60 % / 90 A~100%
H
IP21S
+49 (0) 79 04 / 700-51999
9
Year of production:
E-Mail: support@ts.guede.com