Instructions for Use
Aortic punch
2.2
Hotline
•
Should you have any questions on how to handle the product or use it for clinical applications, please
do not hesitate to contact the Product Management:
Tel:
+49 7461 706-234
Fax:
+49 7461 706-312
•
Should you have any technical questions or questions concerning maintenance contracts or training
courses, please contact our Martin Service Center:
Tel:
+49 7461 706-343
Fax:
+49 7461 706-408
E-mail:
service@klsmartin.com
Each product and its packaging are usually marked with a specific production lot number (LOT) and a
reference number (REF). Please always indicate LOT and REF in case of a complaint.
2.3
Scope of Delivery
The scope of delivery depends on the selected product and may include removable parts depending on the
instrument.
2.4
User's Inspection
•
Immediately upon receipt, the goods must be checked for completeness and potential damage in
transit.
•
Potential transport damage as well as any deviations from the delivery note must be reported
immediately.
Before initial use, before each subsequent use and before returning the instruments for repair,
maintenance or service:
•
Remove protective caps or protective covers if present.
•
The instruments must be cleaned, disinfected and sterilized according to our reprocessing instructions,
see section 5 "Processing", page 26.
2.5
Warranty
Our Standard Terms and Conditions of Sale effective at the time shall apply. Agreements diverging from
these Standard Terms and Conditions do not restrict the legal rights of the buyer.
Any warranty exceeding the above provisions shall require a contractual form and shall exclude
component-related vandalism and consumables.
Gebrüder Martin, as the manufacturer of the products, accepts no liability for direct or consequential
damage caused by improper use, handling, processing, sterilization or maintenance. Unauthorized
instrument repair (by firms or persons not specifically authorized by Gebrüder Martin to perform such
work) shall void the warranty given! The products must never be modified.
Revision 2
23