Steca Elektronik coolcept Notice D'installation Et D'utilisation page 89

Acoustic alarm
Backlighting
TCP/IP network
The following section assumes that you know the parameters required for setting up the TCP/IP
network connection. Consult (further) technical professionals if required.
747.431
Possible causes:
2)
Internal temperature too high
n
User default
n
Frequency too high
n
Controlled by grid operator (feed-in management)
n
Delayed increase in power after starting
n
Can be reset to 0 via Settings ▶ Reset max. vals.
3)
An acoustic alarm sounds (approx. 4.5 kHz) when an event mes-
sage is displayed.
2 tones: warning
n
3 tones: error
n
The acoustic alarm is switched off with the factory default set-
tings.
off
n
automatic: switches on for 30 seconds when a button is
n
pushed
Grid feed:
n
Not feeding : switches on for 30 seconds when a button
–
is pushed; then switches off
Feeding : switches on for 30 seconds when a button is
–
pushed; then dims
Power limiter
GB
89