Steca Elektronik coolcept Notice D'installation Et D'utilisation page 116

GB
Changing numeric settings
Calling up the service menu and editing the values
ATTENTION!
Risk of yield losses and contravention of regulations and standards. Inverter and grid parame-
ters can be changed in the service menu. The service menu must therefore only be used by
technical professionals who know the applicable regulations and standards.
116
✔ A numeric setting is displayed (example
1. Press SET. The selected value flashes (
2. Press rs to change the value.
3. Press SET. The change is adopted (value no longer flashes)
or
Press ESC to cancel the change (value no longer flashes).
4. Press s. The next value is selected.
5. Repeat steps 1 to 4 for the remaining values.
6. Press ESC. The next higher menu level is displayed.
1. Select the Service menu item.
2. Press SET. The fig. shown at the left appears.
3. Press rs simultaneously for 3 seconds. The service menu is
displayed (Fig. left).
4. Press rs to select a menu item.
5. Press SET to edit the menu item. The following applies:
Enter the password if required (Fig. left); see
n
Ä 3.3.4, S. 90
If necessary, press rs within a menu item to display
n
and edit other settings (e.g. Voltage limits).
The menu items are described in
n
Date in Fig. left).
Day in Fig. left).
Ä 3.3.4, p. 90 .
747.431