Steca Elektronik coolcept Notice D'installation Et D'utilisation page 123

Event message Description
The maximum permissible boost converter temperature has been
BCONV over-
exceeded. The inverter feeds no power into the grid until the maximum
temperature
permissible temperature is no longer exceeded.
1. Check that the installation conditions are satisfied.
2. Contact your installer if this message occurs frequently.
The boost converter is defective, the inverter is not feeding into the grid
Boost con-
or is feeding at reduced power.
verter defective
u Contact your installer.
u Contact your installer.
Boost con-
verter not de-
tected
747.431
GB
Type
123