Steca Elektronik coolcept Notice D'installation Et D'utilisation page 115

Displaying yields numerically (list) and graphically (chart)
Editing selection lists containing check boxes
Editing selection lists containing radio buttons
747.431
✔ The status display is shown.
'SET' . The main menu is displayed with 'Yield'
1. Press
selected.
'SET' . The list with yield time periods is shown.
2. Press
3. Press rs to select a yield time period.
4. Press 'SET' . The individual yields for the yield time period are
shown in a list (Fig. left).
5. Press rs to select an individual yield value.
'SET' . The selected individual yield is shown in a chart
6. Press
(Fig. left).
7. Press rs to page through the charts.
'SET' to return to the list.
8. Press
✔ A selection list with check boxes is displayed (Fig. left).
1. Press rs to select a check box.
2. Press 'SET' . The state of the check box changes from on to
off and vice-versa (preset check boxes cannot be changed).
3. Repeat steps 1 and 2 for further check boxes as required.
'ESC' . The changes are adopted and the next higher
4. Press
menu level is displayed.
✔ A selection list with radio buttons is displayed (Fig. left).
1. Press rs to select a radio button that is currently switched
off.
'SET' . The selected radio button is switched on and the
2. Press
previously switched on radio button is switched off.
'ESC' . The changes are adopted and the next higher
3. Press
menu level is displayed.
GB
115