Preparing The Dc Connections - Steca Elektronik coolcept Notice D'installation Et D'utilisation

GB
Fig. 6: Connection of N and PE in the AC plug (above) or junction box (below)
①
Connection cable between N and PE with the connection point inside the AC plug
②
External conductor L1
③
External conductor L2
④
Connection cable between N and PE with the connection point inside the junction box
⑤
Casing of the AC plug
⑥
Junction box
Fig. 7: External conductor voltages in 2- and 3-phase grids with 100 V ... 127 V
4.4

Preparing the DC connections

DANGER!
Risk of death by electrocution!
– Observe the warning notes in
– coolcept: Opposing Multi-Contact connectors must be used for the DC cable to suit the
Multi-Contact MC4 plug connectors (opposing connectors optionally available).
– coolcept-x: Use the SunClix plug connectors provided to ensure that the specified degree
of protection is maintained.
104
Ä 4.1, p. 99 .
747.431