Malaguti Spider Max GT500 Manuel D'utilisation Et D'entretien page 122

The partial distance cannot be reset when the "Route Memory"
function has been selected from the Main Menu; any attempt to
reset the partial distance will reset the route memory.
C) AIR TEMPERATURE FUNCTION:
• This displays ambient temperature in
1
D) STAND-BY:
2
• With this function, you can switch from
3
4
5
6
16
degrees Celsius.
Temperature is shown at the bottom of
the display along with the wording
'TEMP'.
one item to another of the Main Menu
by holding the "MODE" button down for
more than one second.
If the "MODE" button is not pressed for
more than 4 seconds, the sub-menu will
automatically return to the TOD function.
3.11.3 MAIN MENU
To access Main Menu function selection mode, hold the "MODE" key
down when the sub-menu is displaying "STAND-BY" (D - § 3.11.2).
A) INSTANT SPEED FUNCTION:
A B
If MODE is not pressed for
4", Main Menu selection
function is closed
• This displays the current speed.
This piece of information is shown at
the centre of the display; the unit of meas-
urement (km/h or mph) is indicated by
the relevant logo.
B) REVOLUTION COUNTER FUNCTION (RPM):
• This indicates the number of engine
revolutions.
This information is highlighted by the
relevant logo (rpm x 100) at the centre
of the display.
ENGLISH
C D
Fig.16b