Key Switch; Handlebar Lock - Malaguti Spider Max GT500 Manuel D'utilisation Et D'entretien

3.14 KEY SWITCH

• This switch (Fig. 21) controls the ignition circuit the handlebar
lock, the seat opening mechanism / the helmet compartment
and glove compartment.
a) ignition disabled (the key can be removed).
1
b) 'ready to start' position (the key cannot be removed).
c) handlebar lock activated (ignition is disabled. The
2 key can be removed) (§3.15)
d) helmet compartment opening position (§3.7)
3
e) glove compartment opening position (§3.9)
4
The vehicle is supplied with two keys
If you lose one of the keys, ask an Authorised MALAGUTI
5
Service Centre for a replacement (spare key). If you lose
both keys, you will have to replace the entire key block
6
22
and 'Immobilizer' system.

3.15 HANDLEBAR LOCK

Locking
turn the handlebar all the way to the right or left, push the key in
and turn it counter-clockwise (fig. 22).
Disengaging
Turn the key clockwise.
c
e
a
b
d
Fig. 21
ENGLISH
Fig. 22