Güde GBF 550 Traduction Du Mode D'emploi D'origine page 12

GB
For reprints, even partial, permission required. Technical changes reserved.
Labeling:
Product safety:
Product complies with EU
standards
Restrictions:
Keep your hands out!!
Do not pull the power cord!
Warning:
Warning, by standing persons
must keep sufficient distance!
Orders:
Read the manual before use!
Wear eye protection
Use hearing protection!
Environmental protection:
Dispose the waste
professionally. Do not litter.
Malfunctioning and/or
disposed electric or electronic
devices must be disposed to
authorized scrap-yards.
Please read the operating manual carefully before starting the machine.
Do not use in rain!
Warning – danger of pull in!
Wear safety gloves!
Packing material made of
cardboard can be disposed
in scrap-yards.
A.V. 2
Package:
Protect from wet
Technical data:
Plug
Max. drilling diameter
Straight milling
Spindle rotation
Machine
Mini drill and mill GBF 550
For handymen and craftsmen, vertical lead of machine head,
cross-table with 3 grooves, drilling head with angle possibility
+/- 45°, cross-table and machine head with dovetailed guide,
manual control wheel with adjustable dividing rings (division
0,02mm), guard against metal chips, fine calibration for drilling
and milling.
Equipment (serial):
Alien wrench, fork wrench, chuck with ring gear, chuck key,
chuck hook, chuck guard, plastic oil bottle, hook key, pulling
rod, guide inserts, threaded rod, nuts.
Following accessories can be delivered as optional:
9-parts set of collect chucks to fasten the shank mills Ø 4; 6; 8;
10; 12; 14; 16mm
EAN: 40 15671 16304 2
Ord. no.: 48141
End mill
Diameter: 30mm
EAN: 40 15671 16305 9
Ord. no.: 48142
Cutting tips suitable for end mill ord. no.: 48142
EAN: 40 15671 16306 6
Ord. no.: 48143
12
This side up
Engine power
Shank milling
Table size
Weight