SOLIS BARISTA PRO 114 Mode D'emploi page 177

TROUBLE SHOOTING GUIDE
PROBLEM
Machine is not working
No ground coffee coming from grinder
Grinder does not start when micro
switch is pressed. «Filter Size» lights
are cycling through single and double
Too much/too little ground coffee is
being delivered to the filter basket
Too much/too little espresso is being
delivered to the cup
POSSIBLE CAUSES
The unit appears to be «on» but the
machine ceases to operate
No coffee beans in hopper
Bean Hopper safety interlock is open
(hopper is not correctly in place)
Grind amount settings are incorrect for
particular grind size
Grind amount settings and or grind size
require changing
WHAT TO DO
The safety thermal-cut may have activated due to
the pump or grinder overheating. Turn the machine
off and allow it to cool for about 30-60 minutes.
Fill hopper
Remove hopper, check for any then debris replace
the hopper into the correct location
Use the grind amount dial to increase or decrease
the grind amount
Reset the machine to defaults or re-program
new coffee dose settings
E
177