SOLIS BARISTA PRO 114 Mode D'emploi page 160

E
A LIFETIME OF EXPERIMENTATION
PRE-PROGRAMMED DOSE– DOUBLE CUP
Press the two cup button once. A preset
dose of approx 60 mls will be delivered. A pumping
noise will be heard in this operation. The machine
will automatically stop once the preset pour has
been delivered.
NOTE:
Pressing the one cup
buttons during a programmed espresso will
immediately stop the pour.
160
PROGRAMMING SINGLE ESPRESSO
1. Prepare to make a single cup of espresso by
following steps 2 to 4 in «A MINUTE TO
LEARN» on pages 151-153.
2. Place your cup underneath the group head.
3. To begin programming, press the «PROGRAM»
button once. The machine will beep once and
the program button will begin to flash. This
indicates the machine is in programming mode.
4. Press the one cup
will commence normal pour function, and the
one cup button surround will begin to flash.
5. When the desired amount of espresso has
poured into the cup, press the one cup
button to stop the pour. The machine will beep
twice, indicating it has saved your measured
pour quantity and exited programming mode.
or two cup
PROGRAMMING DOUBLE ESPRESSO
1. Prepare to make a two cup of espresso by
2. Place your cup underneath the group head. 3.
4. Press the two cup
button once. The machine
5. When the desired amount of espresso has
following steps 2 to 4 in «A MINUTE TO
LEARN» on pages 151-153.
To begin programming, press the «PROGRAM»
button once. The machine will beep once and
the program button will begin to flash. This in-
dicates the machine is in programming mode.
button once. The
machine will commence normal pour function,
and the two cup button surround will begin
to flash.
poured into the cup, press the two cup
button to stop the pour. The machine will
beep twice, indicating it has saved and exited
programming mode.