Yamaha E8D Manuel D'utilisation page 124

E
cC
Do not use the tilt support lever/knob
when trailering the boat. The outboard
motor could shake loose from the tilt
support and fall. If the motor can not be
trailered in the down position, use an
additional support device to secure it in
the up position.
EMU03270
Clamp handle mounting model
When transporting or storing the outboard
motor while removed from a boat, fold the
tiller handle and lean the motor on the tiller
handle to keep in a horizontal position.
cC
Keep the power unit higher than the pro-
102013
peller at all times. Otherwise, cooling
water can run into the cylinder, which
could result in damage.
NOTE:
Place a towel or the like under the outboard
motor to protect it from damage.
EMU17850
STORING OUTBOARD MOTOR
When storing your outboard motor for pro-
longed periods of time (2 months or longer),
several important procedures must be per-
formed to prevent excessive damage. It is
advisable to have your outboard motor ser-
viced by an authorized Yamaha dealer prior
to storage. However, the following proce-
dures can be performed by the owner with a
minimum of tools.
4-5