Changing The Column Settings - SORHEA MAXIRIS 3000 Notice D'installation

SORHEA
7.4

Changing the column settings

Note: To change the column parameters, log in "admin".
Network management
(cf. §7.4.1)
and IP address
(cf. §7.4.2)
Password
management
(cf. §7.4.3)
Management
of names of
zones
(cf. §7.4.4)
7.4.1 Configuring the MAXIBUS III network settings
Validate "ModBus 485" and choose a slave address from 1 to 64.
Network validation
7.4.2 Configuring the column IP address
1. Change the IP address then validate with "Send".
2. Log with the new IP address
Type the new IP address
Validate with "Send"
- 66 -
MAXIRIS 3000 / 3100
Clock settings
(cf. §7.4.6)
Inputs / outputs
management
(cf. §7.4.5)
Slave address
selection
(1 to 64)