SORHEA MAXIRIS 3000 Notice D'installation page 49

SORHEA
 Mounting the infrared cover
1. Insert the cover in the upper arch of the column in order to open the cover and insert it in the
rabbets of the Frame (Make sure you do not move the cells).
2. Slide the cover upwards towards the top by holding it at the arch point.
3. Put back progressively the cover in to the Flange and make sure it clips into the upper and
lower Flask.
4. Fasten the screws in the cover.
1
3
 Wall fastening
4 wood screws 4.8x60
2
1
70
Spacers
1
 Remove the plugs filling the mounting holes
 Install the spacers at the rear of the frame by
aligning them with the mounting holes. The
spacers remaining must be mounted in pairs
equidistant from the first ones
 Attach the column to the wall.
 Pass the cabling through the bottom of the
column.
- 48 -
MAXIRIS 3000 / 3100