Double Direction, Double Face Mounting For Column Maxiris 3100 Only - SORHEA MAXIRIS 3000 Notice D'installation

SORHEA
5.3

Double direction, double face mounting for column MAXIRIS 3100 only

1. Wiring the terminal block (white direction)
White direction
ON
Terminal board POWER
Ground
Ground + 230V AC / 110V AC
N (+)
L (-)
*
Position of switches for wiring the tamper contact to the removable terminal blocks:
Position of switches
ON
Switches up
ON
Switches down
2. Wiring the interconnection board (yellow direction):
Tamper contact available on terminals 1 and 2
Tamper contact available the bus
(MAXIBUS III network)
Yellow direction
N° of terminal Description
1 Tamper*
2 Tamper*
3 + Auxiliary input
4 - Auxiliary input
5 Not in use
6 Not in use
7 Not in use
8 Not in use
9 Intrusion relay white NO
10 Intrusion relay white CO
11 Disqualification relay white NO
12 Disqualification relay white CO
Ground shield
S1 + Not in use
S1 - Not in use
S2 + + Synchronization white
S2 - - Synchronization white
A BUS
B BUS
A BUS
B BUS
Description
N° of terminal
Ground shield
S1 + + Synchronization yellow
S1 - - Synchronization yellow
INT Intrusion relay yellow NO
INT Intrusion relay yellow COM
DISC Disqualification relay yellow NO
DISC Disqualification relay yellow COM
- 55 -
MAXIRIS 3000 / 3100
Description