SORHEA MAXIRIS 3000 Notice D'installation page 69

SORHEA
 By default, anti-climbing cap is enabled. (box "Activated" below "Anti-climbing device"
checked).
 Auxiliary input unused: auxiliary input not managed
 Auxiliary input sets as Alarm input: permits to integer an external contact in the column
Principle of the auxiliary input polarization:
3
+ Auxiliary
4
- Auxiliary
 Auxiliary input sets as History validation: permits to stop the memorization of the events in
the column memory of the white and/or yellow zones.
Select the zones managed by the external contact in the right side.
Events stopped:
 Intrusion
 Disqualification / end disqualification
 Receiver auxiliary alarm
 Transmitter auxiliary alarm
 Receiver anti-climbing device alarm / back to receiver anti-climbing device alarm
 Transmitter anti-climbing device alarm / back to transmitter anti-climbing device
alarm
 Defect of mains transmitter / back to mains transmitter
 Defect of mains receiver / back to mains receiver
 Intrusion alarm zone 1, intrusion alarm zone 2, intrusion alarm zone 3
 Disqualification of cross beams, back to cross beam
7.4.6 Clock settings
Updating the direction with the PC time by clicking on "Send".
External contact
+
External
12V DC power supply
-
Time of PC
Set the column clock
- 68 -
MAXIRIS 3000 / 3100