Alarm Settings - SORHEA MAXIRIS 3000 Notice D'installation

SORHEA
The alarm information available on the column are as follows:
Title
IntrusionZ1
Intrusion Z2
Intrusion Z3
Disqualification
Anti-climbing device R Alarm anti-climbing cap
Aux. alarm R
Tamper. R
Fault 12V R
Mains failure R
Anti-climbing device T Alarm anti-climbing cap
Aux. alarm T
Tamper T
Fault 12V T
Mains failure T
8.2

Alarm settings

Click the "Alarms" tab
"Alarms"
tab
Intrusion alarm
settings
Zones management
(Only available for
"Zoning" option)
 Disqualification alarm settings
Description
Intrusion alarm barrier or zone 1
Intrusion alarm in zone 2
Intrusion alarm in zone 3
Disqualification alarm
Alarm auxiliary input
Tamper alarm
12V failure alarm
Tension > 14.5V or < 10.5V
Mains failure alarm
Failure 230VAC
Alarm auxiliary input
Tamper alarm
12V failure alarm
Tension > 14.5V or < 10.5V
Mains failure alarm
Failure 230VAC
Intrusion barrier for "standard" barriers
Intrusion zone 1 for barriers with "Zoning" option
Only for barriers with "Zoning" option
Alarms of Receiver columns (Rx)
Alarms of transmitter columns (Tx)
Minimum number of cells that must be masked to
trigger the disqualification alarm
From 1 to the total number of beams
Masking time of beams to trigger disqualification alarm
(60s to 4 min)
- 70 -
MAXIRIS 3000 / 3100
Notes
Disqualification
alarm settings