General Conditions Of Use; Operator Position - Corghi ProLine Truck 150 Manuel D'utilisation

GENERAL CONDITIONS OF USE

The equipment is intended for professional use only.
WARNING
Only one operator at a time can work with the machine.
Wheel balancers referred to in this manual are designed exclusively for measuring the
imbalances, in quantity and position, of car wheels within the limits indicated in the technical
data paragraph. Furthermore, models equipped with motors must be provided with a suitable
guard, fitted with a safety device, which must be lowered during the wheel spin operation.
WARNING
Any use other than those described in this manual is to be considered improper and
unreasonable.
CAUTION
Do not start the machine without the wheel locking equipment.
WARNING
Do not use the machine without the guard and do not tamper with the safety device.
CAUTION
Do not clean or wash the wheels mounted on the machine with compressed air or jets of water.
WARNING
When working, never use equipment not manufactured by the manufacturer.
WARNING
Learn your machine: knowing exactly how the machine works is the best way to guarantee
safety and machine performance.
Learn the function and layout of all controls.
Carefully check that all controls on the machine are working properly.
The machine must be installed properly, operated correctly and serviced regularly in order
to prevent accidents and injuries.
Figure 11 shows the operator's positions during the various work phases:
A Mounting/Demounting, spin, dimension detection (where foreseen) and wheel balancing
operations
B Machine program selection
In this way, the operator is able to perform, monitor and check the outcome of each wheel
balancing and intervene in case of unforeseen events.
88

OPERATOR POSITION

User manual ProLine Truck 150