Corghi ProLine Truck 150 Manuel D'utilisation page 119

Balancing program type
ALU 5
STATIC
This key allows you to access the machine calibration procedure as described in detail in
section "CALIBRATION PROGRAMS".
This key allows you to display and/or change the currently selected weight unit of
measurement. The units available are grams (GRAM) and ounces (OUNCE).
DISPLAY OF CURRENT UNIT
To display the current unit of measurement, briefly press [P4]
is displayed for three seconds, after which the machine returns to display SEr SEr.
CHANGE OF CURRENT UNIT
To change the current unit of measurement, keep [P4]
seconds. The new unit of measurement will be displayed, after which the machine returns
to display SEr SEr.
The unit of measurement selected is maintained even after turning off the machine.
[P5] Select inches/millimetres
This key allows you to display and/or change the unit of measurement of the wheel
dimensions currently selected. The units available are inches (INCHES) and millimetres
(MILLIM).
User manual ProLine Truck 150
Application position for
adhesive weight Plane A
H6 or LASER
[P3] Machine calibration
[P4] Select grams/ounces
Application position for
adhesive weight Plane B
H6/LASER or H12
. The unit selected
pressed for three
H12
UK
119