Corghi ProLine Truck 150 Manuel D'utilisation page 75

the parts.
- The machine head is supplied already wired. So, just insert it inside its housing (A, Fig.2)
and fasten the 3 screws supplied in the rod of the display support (B, Fig.2).
- Turn on the machine and make sure it operates correctly.
- Fix the guard support to the rear section of the machine with the four included screws
(A, Fig.3);
- Fasten the guard tube on the pivot using the M10 screw supplied (B, Fig.3);
- Fit the spring included in the equipment (C, Fig.3);
- Connect the microswitch cable, located inside
the guard mounting, to the cable exiting from
the hole drilled in the back of the machine (D,
Fig. 4);
After installing the machine, move it to the selected
location, ensuring that the spaces surrounding the
machine comply with the minimum dimensions
indicated in Fig. 5/5a.
User manual ProLine Truck 150
Head assembly (fig. 2)
Guard assembly (fig. 3/fig. 4)
2
UK
3
4
75