Corghi ProLine Truck 150 Manuel D'utilisation page 120

DISPLAY OF CURRENT UNIT
To display the current unit of measurement, briefly press [P5]
selected is displayed for three seconds, after which the machine returns to display SEr
SEr.
Press any key to exit the display of the current unit without waiting for three seconds.
CHANGE OF CURRENT UNIT
To change the current unit of measurement, keep [P5]
seconds. The new unit of measurement will be displayed, after which the machine
returns to display SEr SEr.
The unit of measurement selected is maintained even after turning off the machine.
[P6] Select the imbalances view threshold
This key allows you to edit the imbalance display threshold. This procedure is intended
for technical support personnel, therefore it is not described in this manual.
[P9] Automatic position search (RPA)
This key allows you to access the automatic position search (RPA) program as described
in detail in section "Automatic position search (RPA)".
[F+P2] Select weights material (Fe/Zn or Pb)
This key allows you to select the balancing weight material. The options available are
listed in table T10. The selection of the material type slightly changes the balancing
results because the weights in Iron/Zinc are lighter than those in Lead and therefore are
larger. The machine takes account of these differences when calculating the imbalance.
Type of balancing
Option
weight material
Fe Iron or Zinc
Pb Lead
120
Table T10: Balancing weights materials
This material has been set by default.
In some countries (such as those of the European
Community), Lead weights are prohibited by
law.
pressed for three
Notes
User manual ProLine Truck 150
. The unit