Corghi ProLine Truck 150 Manuel D'utilisation page 77

Fixing the machine to the ground (fig.7)
Should it be necessary to fasten the machine to the floor, proceed as follows:
- undo the three M8 screws fastening the machine to the pallet;
- Position the machine on the ground in the selected position and make sure that the
surrounding spaces correspond to the minimum values indicated in Fig. 5/5a;
- Trace the position for drilling on the floor;
- drill holes in the positions marked and insert Fischer M8 anchor bolts in the holes;
- Fix the machine to the ground using the Fischer screws and washers (fig.7).
User manual ProLine Truck 150
6
UK
7
77