Switch Point Settings; Switching Mode - HYDAC ELECTRONIC HPG 3000-000 Notice D'utilisation

8

8.1 Switch point settings

In the change menu ("cHAn"), the following switch point settings can be changed for
switching output 1 and switching output 2:

1. Switching mode

2. Switch point setting
3. Hysteresis setting
4. Switching direction: N/C or N/O function
5. Switch on delay
E
6. Switch off delay
8.1.1 Switching mode
Each switching output can be set up to operate as "Switch point function" or
"Window Function".
Abbreviations:
Status: 11.09.2015
= Switching mode for switching output 1
(switch point function / window function)
= Switching mode for switching output 1
(switch point function / window function)
= Window function
= Switch point function
HYDAC ELECTRONIC GMBH
HPG 3000
Part No.: 669716