Error Messages; Communication Eds 4000; Communication Eds 800 - L - HYDAC ELECTRONIC HPG 3000-000 Notice D'utilisation

12

9 Error messages

9.1 Communication EDS 4000

Abbreviations:
E

9.2 Communication EDS 800 - L

Abbreviations:
Status: 11.09.2015
= Incorrect settings
invalid values in menu item „Change"
(SBP too close to SP, SBP too close to zero pint, ...)
= Communication fault
Connection incorrect or HPG damaged
= Timeout failure: device doesn't respond within the specified time
HPG / pressure switch damaged or incorrect base menu settings
= SPCount parameters are invalid
Communication fault by EMC, damaged or adjusted device, cable fault
= Window parameters are invalid
Communication fault by EMC, damaged or adjusted device, cable fault
= LoAd: A transmission error has occurred
SAVE: SAVE could not be carried out successfully.
The part number of the connected device does not correspond with the
part number of the device whose data were originally imported.
= Incorrect settings
invalid values in menu item „Change"
(SBP too close to SP, SBP too close to zero pint, ...)
= Communication fault
Connection incorrect or connected device damaged
= Device sends wrong response
Communication fault by EMC, damaged cable, damaged device
= Timeout failure: device doesn't respond within the specified time
HPG / pressure switch damaged or incorrect base menu settings
HYDAC ELECTRONIC GMBH
HPG 3000
Part No.: 669716