Renkforce AR-2808 Notice D'emploi page 58

• 5 beeps sound when an invalid card is recognized.
A super access card is valid at any time both in normal operation and
locked mode.
3. Scan super access card to lock the system.
• Scan the super access card 1x and then press the doorbell key 1x within 3 seconds.
• 2 beeps sound for confirmation when the card is successfully scanned. The blue
status LED flashes slowly (approx. 0.5 s on, 1 s off) as long as the system is locked.
• 5 beeps sound when an invalid card is recognized.
While the system is locked, the blue status LED flashes slowly and the card
reader rejects normal access cards. Super access cards retain access.
The output switch and doorbell still function normally and are not affected
by activating locked mode.
4. Scan super access card to deactivate locked mode.
• Scan the super access card 1x and then press the doorbell key 1x within 3 seconds.
• 2 beeps sound for confirmation when the card is successfully scanned. The system
switches to normal operation and the blue status LED remains lit.
• 5 beeps sound when an invalid card is recognized.
58