Renkforce AR-2808 Notice D'emploi page 49

Erase option 1 - Erase an unused card
1. Scan the master card 2x to
activate program group 2
3. Erase the
unused access
cards
1. Scan the master card 2x to activate program group 2 (erasing access cards).
The blue status LED flashes during programming and LED 2 of the power indicator lights
up. After approx. 2 seconds, 2 beeps sound for confirmation and power indicator LEDs
1, 2 and 3 flash to indicate the 3 available erase options.
2. Press the doorbell key to select Erase option 1.
Power indicator LED 1 lights up. After approx. 2 seconds, 2 beeps sound to confirm the
selection.
3. Scan unused card (e.g. in case of change of personnel).
Scan several cards one at a time to erase each. For each card erased, the corresponding
memory group LED lights up for approx. 1 second. 2 beeps sound for confirmation.
4. Scan the master card 1x to exit programming mode.
2 beeps sound. This confirms that the product is in normal operation mode.
Erase option 2 - Erase a lost card
1. Scan the master card 2x to
activate program group 2
3. Erase the
lost cards
4. Exit programming
mode
4. Exit programming
mode
2. Select
Erase option 1
2. Select
Erase option 2
49