Renkforce AR-2808 Notice D'emploi page 55

3. Scan the master card 1x to exit programming mode.
2 beeps sound. This confirms that the product is in normal operation mode.
The system registers each successive failed attempt within a 30 second
period and resets when no card is scanned.
Program group 5 - Creating/erasing super access cards
As a rule, super access cards are created for CEOs or reliable leading employees.
Super access cards can lock and unlock the system. A total of 5 super access cards
can be created for all 5 memory groups. One super access card can be created for
each memory group. Super access cards can perform the following functions:
• Locking the system after office hours or once the building has been vacated.
Switches alternately between locked and unlocked.
• Immediate system unlock at any time.
• A super access card also functions as the access card of the card owner (e.g. CEO)
to open or close a door at any time.
Option 1 - Creating a super access card
1. Scan the master card 5x to
activate program group 5
3. Select memory
group 1 - 5
1. Scan the master card 5x to activate program group 5.
The blue status LED flashes during programming and the 5 power indicator LEDs lights
up. After approx. 2 seconds, 2 beeps sound for confirmation and power indicator LEDs
1 and 2 flash to indicate the 2 available options.
2. Select
option 1
4. Registering
a super access
card
5. Exit programming
mode
55