Renkforce AR-2808 Notice D'emploi page 47

Program group 1 - Registering access cards
The system features 5 memory groups for registering up to 500 access cards. Each
group consists of 100 memory slots for easy organization of registered cards. The
corresponding LED of each memory group lights up there are memory slots available.
The LED flashes when no more memory slots are available (memory group full).
The system was designed for medium-sized to small companies or for private use.
It is recommended to evenly register access cards across all 5 memory groups. For
example, in an office with 25 employees, register 5 access cards in each of the 5
memory groups. If it is then necessary to erase a memory group, this will only effect
one group of 5 cards.
Create a list of all registered cards according to group so you have an overview. This
will be of great assistance in case a card is lost.
Example overview
Storage group 3....5
Storage group 2
Storage group 1
User number
Proceed as follows to register access cards:
1. Scan the master card 1x
to set the system to program
group 1
3. Register the new
access cards
Name of holder
1
2
3
4
5
6
-
-
-
100
4. Exit programming
mode
John
Tracy
Nancy
Alan
Paul
Mary
-
-
-
2. Select memory
group 1 - 5
Remark
Sales
Sales
Admin
Engineering
Engineering
Accounting
-
-
47