Renkforce AR-2808 Notice D'emploi page 51

Example user list once memory slots have become free again.
Before
1. John
2. Tracy
3. Nancy
4. Alan
5. Paul
6. -- (free slot)
Register cards to free slots in the following order: Register the first new card to Slot 3,
the second to Slot 4 and the third to Slot 6 at the end of the list.
Erase option 3 - Erase all cards in a group
1. Scan the master card 2x to
activate program group 2
3. Select one of the
memory groups 1 – 5
1. Scan the master card 2x to activate program group 2 (erasing access cards).
The blue status LED flashes during programming and the 2 power indicator LEDs lights
up. After approx. 2 seconds, 2 beeps sound for confirmation and power indicator LEDs
1, 2 and 3 flash to indicate the 3 available erase options.
2. Press the doorbell key to select Erase option 3.
Power indicator LED 3 lights up. After approx. 2 seconds, 2 beeps sound to confirm the
selection. All 5 power indicator LEDs flash.
3. Press the doorbell key to select the memory group you wish to erase (1 - 5).
After
1. John
2. Tracy
3. -- (free slot, card erased)
4. -- (free slot, card erased)
5. Paul
6. -- (free slot)
2. Select
Erase option 3
4. Erase memory
group
5. Exit programming
mode
51