Renkforce AR-2808 Notice D'emploi page 43

Example of use for an electronic single access lock
* See door lock selection jumper
1. SAFE -- For fail-safe electric lock
2. SECURE -- For fail-secure electric lock
• Connect the diode IN4004 as near to the lock as possible and parallel to the lock's
electrical connections. This is necessary to prevent feedback and avoid damage to
the card reader.
• To avoid electrical discharge and subsequent interference of the card reader,
connect the ground connector (-) to ground.
1
( + ) ( – )
12VDC
( + )
12 V/DC
Power
supply ( – )
Cathode
AR-2808
2 3 4 5 6
( + ) ( – ) EG DATA
DOOR LOCK IN I/O
Electric lock
( + ) ( – )
*
IN4004
7 8 9 10
DOOR BELL TAMPER
N.O. N.C.
Egress button
N.O.
(Indoors)
More egress buttons can
N.O.
be connected in parallel.
43