Operation - ETNA SM344RVS Mode D'emploi

USE

Operation

EN 12
• Warning! Heating liquids in the microwave can result in delayed
boiling. This means that the liquid may start to boil furiously after it
is removed from the microwave, with the risk of scalding. You can
offset the delayed boiling effect by placing a plastic or glass spoon
in the liquid prior to heating it in the microwave.
• Warning! Take care with baby food:
▷ Please note! Shake or stir the content of babies' bottles or pots
of baby food after heating.
▷ Please note! Check the temperature of the food carefully prior
to consumption to prevent scalding injuries.
Warning! Cutlery and tableware may become hot after using the
microwave.
1. Press the on/off button to switch on the microwave function.
'01:00' flashes in the display and the microwave function icon is
visible.
2. Turn the selection dial to set the cooking time.
The maximum cooking time depends on the power you have set.
3. Press the power/weight button to set the microwave power.
'950' flashes in the display.
4. Turn the selection dial to set the microwave power (between 100
W and 950 W). Press the power/weight button again to confirm or
wait until the power stops flashing in the display.
You will hear an audible signal.
5. Press the start/stop button to start the cooking process.
When the cooking process is complete you will hear 5 audible
signals.
The fan will continue to run for a while before switching itself off.
If the start/pause button is not pressed, the microwave will switch off
automatically after 5 minutes.