ETNA SM344RVS Mode D'emploi page 36

USE
EN 14
Selecting automatic cooking programs
1. Press the on/off button to switch on the microwave.
'01:00' flashes in the display and the microwave icon is visible.
2. Turn the function dial 1 position (P01) or 2 positions (d01)
to the right.
The time, weight and first number of the automatic programs
appear in the display and the defrost icon/automatic program icon
is visible.
3. Turn the selection dial to the right to select an automatic cooking
program (see the table). The selected program is active when the
symbol stops flashing.
You can go back one step by turning the function dial one
position to the left.
4. Press the power/weight button to set the weight.
The weight flashes in the display.
5. Use the selection dial to set the desired weight. Press the power/
weight button again to confirm.
The weight you set depends on the selected program.
6. Press the auto menu button to confirm or change a selected
setting (for automatic cooking programs).
7. Press the start/pause button to start the automatic cooking
program.
When the cooking process is complete you will hear 5 audible signals.
The fan will continue to run for a while before switching itself off.
If the start/pause button is not pressed, the microwave will switch off
automatically after 5 minutes.