Operation; Setting The Clock; Operation Of The Oven - ETNA A3911RVS Mode D'emploi

OPeratION

Setting the clock

Operation of the oven

GB 14
If you are connecting the appliance for the first time the symbols
'AUTO' and '0 00' will flash. You can now set the clock.
1. Press the kitchen timer/timer button for 3 seconds.
The heating symbol will appear and the dot will flash.
2. Set the correct time (if the dot is still flashing) with the + and the -
button and wait for an audible signal which indicates that the time
is saved.
The current time appears on the display.
▷ If the dot is no longer flashing you cannot set the time. You can
now change the time by pressing the + and - button at the same
time and holding down until the dot starts to flash once again.
1. Select a temperature with the thermostat button and an oven
function with the function button.
▷ See page 15 for more information about the various oven
functions you can select.
2. Set the thermostat button and the function button to '0' following
completion of the cooking time.