Bringing The Oven Into Operation; Setting The Clock - ETNA T2130 Notice D'utilisation

Bringing the oven into operation

cleaning the microwave oven and
accessories
Remove the accessories from the combi-
microwave oven and clean the oven with a
mild cleaning agent.
Switch the hot-air function on for one hour at
230 °C (see page 15). Protective greases used
during manufacture will then be removed.
remark
When the oven is heated strongly for the first
time, it will have a 'new' smell. This is normal.
Switch the extractor hood on if necessary or
open a window.
After the oven has cooled down, clean it with
warm water.
■ A beep sounds when the 'TIMER/WEIGHT'
control knob is turned.
■ Press the 'START/+30SEC./CONFIRM'
button to restart the cooking programme
after the door has been opened.
■ If the 'START/+30SEC./CONFIRM' button is
not pressed within 5 minutes of selecting a
cooking programme the programme will
not start.
■ A beep sounds when a button is pressed.
If no beep is heard then the button has not
been pressed firmly enough.
■ Five beeps will sound when a cooking
programme finishes.

Setting the clock

1 Press the 'CLOCK/PRE-SET' button. Select
either 12-hour or 24-hour notation.
2 Turn the 'TIMER/WEIGHT' control knob. Set
the hours (between 0 and 23 for 24-hour
notation / between 1-12 for 12-hour
notation).
3 Press the 'CLOCK/PRE-SET' button. The
minutes-display starts to flash.
4 Turn the 'TIMER/WEIGHT' control knob. Set
the minutes (from 0-59).
5 Press the 'CLOCK/PRE-SET' button.
The time that you have set is displayed (":"
flashes). If you press 'STOP/CLEAR' while
setting the clock the previous clock setting
will be displayed.
remarks
When the microwave is connected to the
electricity supply the display will show "0:00".
Clock/Pre-Set Microwave Grill/Conv./Combi.
1/3/5
Defrost Auto Reheat
Start/
Stop/Clear +30Sec./Confirm
2/4
Timer
Weight