Tractel tirak L 500 P Série Manuel D'installation Et De Manutention Original page 41

Fault
Cause
The load cannot be lowered / slackened although the wire rope can be lifted / pulled.
The load has come to rest on an obstacle or has jammed on an obstacle. –
The load has come to rest on an obstacle or has jammed on an obstacle. –
The wire rope cannot be fed in.
Rope tip faulty.
Hoists fitted with hand cranks: The load moves downwards with the operating brake open and the hand crank in the operating position.
Fault with the spring mechanism for the hand crank.
G1035.2 - 11/2014
Elimination
Carefully move the load upwards and remove the obstacle.
– Check the wire rope, rigging and lifting equipment to confirm their
operating safety.
Carefully move the load upwards and remove the obstacle.
– Check the wire rope, rigging and lifting equipment to confirm their
operating safety.
– Renewing rope tips, see ' 15.4 Care and maintenance, Wire rope' on
page 22.
– Replace the hoist as soon as possible and have it checked / re-
paired by TRACTEL Greifzug GmbH or an authorized hoisting gear
workshop.
Operation and Installation Manual
EN-27