Mettler Toledo IND570 Série Guide D'installation page 9

IF THE KEYBOARD, DISPLAY LENS OR ENCLOSURE IS DAMAGED ON A DIVISION 2 OR ZONE
2/22 APPROVED IND570xx TERMINAL THAT IS USED IN A DIVISION 2 OR ZONE 2/22 AREA,
THE DEFECTIVE COMPONENT MUST BE REPLACED IMMEDIATELY. REMOVE POWER
IMMEDIATELY AND DO NOT REAPPLY POWER UNTIL THE DISPLAY LENS, KEYBOARD OR
ENCLOSURE HAS BEEN REPLACED BY QUALIFIED SERVICE PERSONNEL. FAILURE TO DO SO
COULD RESULT IN BODILY HARM AND/OR PROPERTY DAMAGE.
THE INTERNAL DISCRETE I/O RELAY OPTION #30113540 OR #30113542 MUST NOT BE
USED IN AN IND570xx TERMINAL. FAILURE TO COMPLY WITH THIS WARNING COULD
RESULT IN BODILY HARM AND/OR PROPERTY DAMAGE.
DO NOT INSTALL, DISCONNECT OR PERFORM ANY SERVICE ON THIS EQUIPMENT BEFORE
POWER HAS BEEN SWITCHED OFF AND THE AREA HAS BEEN SECURED AS NON-
HAZARDOUS BY PERSONNEL AUTHORIZED TO DO SO BY THE RESPONSIBLE PERSON ON-
SITE.
USE ONLY METTLER TOLEDO PART NUMBER 30237707 BATTERY.
THE USB INTERFACE IS NOT CERTIFIED FOR USE IN DIVISION 2 OR ZONE 2/22 HAZARDOUS
AREAS. USE ONLY IN THE SAFE AREA.
EXTERNAL USB ADAPTER PART NO. 30139559 IS NOT CERTIFIED FOR USE WITH THE
IND570xx.
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES.
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
NOTICE