Allowed Combinations; Safe Working Load (Swl); Clip Attachment & Detachment; Attach The Clips (5 Steps) - arjo Sara Plus Notice D'utilisation

Allowed Combinations

WARNING
To avoid injury, always follow the allowed combinations listed in this IFU. No other
combinations are allowed.

Safe Working Load (SWL)

• Only use the earlier listed slings with the Sara Plus standing and raising aid.
• The SWL of the Sara Plus is 190 kg (418 lbs)
• Always follow the lowest SWL of the total system. E.g. the Sara Plus lift has a SWL of 190 kg (418 lbs) and
EN
the KKA5130M sling for transfer only has a SWL of 140 kg (309 lbs). This means that the KKA5130 sling
(for transfer only) has the lowest SWL. The patient is not allowed to weigh more than the lowest SWL.
Active Sling
KKA5120
KKA5130M
KKA5370
KKA5090
MFA4000
KKA5420
Clip Attachment & Detachment

Attach the Clips (5 steps)

1. Place the clip on the spreader bar lug. (See Fig. 1 )
2. Pull the strap down.
3. Make sure the lug is locked at the top end of the
clip. (See Fig. 2 )
4. Make sure the strap is not squeezed in between the
clip and the spreader bar.
5. Make sure the straps are not twisted.
Fig. 1
Standing/Raising Aid
SWL
SWL
190 kg (418 lbs)
140 kg (308 lbs)
190 kg (418 lbs)
190 kg (418 lbs)
190 kg (418 lbs)
190 kg (418 lbs)

Detach the Clips (3 steps)

Make sure that the weight of the patient is taken up by
the receiving surface before removing the clip.
1. Pull the strap up. (See Fig. 3 )
2. Make sure the lug is unlocked at the bottom of the
clip.
3. Remove the clip.
Fig. 2
6
Sara Plus
190 kg (418 lbs)
Size
S, M, L, XL
S, M, L, XL
S, M, L, XL
M, L, XL
One size
S, M, L, XL
Fig. 3